All prices are in British Pound Sterling. Click here for Exchange Rates Prices are valid until further notice

Metal Labels : Copper Plant Labels & Markers
Attractive Metal Garden Labels

 

Copper Plant Labels by Alitags are another attractive, easy-to-use plant label which puts an end to your labelling problems. We have developed two types of copper tags, Ballpoint-pen Copper tags for engraving with an ordinary ballpoint-pen and Professional Copper tags for punching with Character Punches and Jig.

 

Ballpoint-Pen Copper Tags

Ballpoint-pen copper tags are easy to engrave using only a ballpoint pen. Press firmly and writing slowly for best results. The engraved copper tags will gradually weather to a muted and attractive verdigris colour over time.

Ballpoint-pen copper tags are available in 3 designs :  C51 is for hanging, CMOS is for pushing into the ground and CTIE is a self-tie label which can be tied around the plant in the same manner as a plastic price/name tag  which is on the plant when you buy it.

 

Copper Plant Labels, Copper Tags, Copper Markers

Ballpoint-Pen Copper Tags
For use with an ordinary pen

PRICE  &  DIMENSION

All prices are in British Pound Sterling (GBP)
Prices for UK and EU include VAT
Prices for USA and Non-EU exclude VAT, as VAT is not payable

 
    Dimension   Prices USA &
        UK & EU Rest of world
 C51 Hanging Label 4" x 7/8" per 50 38.00 31.67
    100mm x 22mm per 25 21.00 17.50
           
 CMOS Mini Ogee 2.3" x 1.4" per 50 41.00 34.17
  Stem 57mm x 35mm per 25 23.00 19.17
    100mm tall      
           
 C-TIE Self-Tie Label 4 1/2" x 3/4" per 50 48.00 40.00
    111mm x 20mm per 25 26.50 22.08
    200mm long      
 

 

Professional Copper Plant Labels
All professional copper tags, except COS, will fit into the jig as normal (picture above). However, the COS labels need special positioning (please see note at the bottom right corner of this page)

 
 
A Jig is available to aid the positioning of the character punches The jig, which is made of steel and brass, clamps the labels in position and the calibration ensures straight lines and even spacing of characters.

Please click on the image to enlarge

Stainless Steel Jig (top) & Steel Jig (bottom)

 

Professional Copper Tags
Attractive Metal Plant Labels

In addition to the Professional Aluminium Alitags, there is also a copper version - - Professional Copper Tags. The Professional copper tags are very much stronger, thicker and about 3 times heavier than the Professional Aluminium tags.

The Professional copper plant labels can be punched with our Characters Punches and Jig. The copper labels will be gradually weathered into dark muted verdigris colour overtime.

 
 

Rectangular Stem Copper Tag

Rectangular Stem (CRS) punched with
5mm Alitags character punches

 

 


 

 

Professional Copper Tags
For use with Character Punches and Jig

PRICES & DIMENSION

All prices are in British Pound Sterling (GBP)
Prices for UK and EEC include VAT
Prices for USA and Non-EEC exclude VAT, as VAT is not payable

Prices USA & Rest  
Dimension UK & EEC of World
 CM Mixed Pack     136.00 113.33

Victorian Copper Label

The standard Victorian label (C7) with 2 holes is a traditional shape for fruit trees, roses and wall plants. The Victorian labels are also available with a single hole for nailing directly on the tree trunk or onto a post.
 

Sizes of Character Punches
A sample of label punched with 3 different sizes of Alitags character punches, i.e. 6mm, 5mm and 3mm

 

Character Punches
Wooden holding Box for punches

 
*NOTE : All professional copper tags, except COS, will fit into the jig as normal. However, the COS labels need special positioning. Here is how :

Step 1) Slide the COS label into the jig and centralise it against the top pins as normal.
Step 2) Place a slightly bent C1 label (supplied) over the stem of the COS and clamp both labels into the jig.
  (5 pieces of each C1, C2, C5, C7, C8 and 2 pieces of each CES, CRS, CVS)  
           
 C1 4" x 3/4" Label 102mm x 19mm per 100 201.00 167.50
per 50 104.00 86.67
per 25 55.00 45.83
 
 C2 4" x 1 1/2" 102mm x 38mm per 100 268.00 223.33
per 50 136.50 113.75
per 25 72.00 60.00
 
 C5 4" x 1" Label 102mm x 25mm per 100 257.00 214.17
per 50 131.00 109.17
per 25 68.50 57.08
 
 C7 Victorian Label (2 holes) 102mm x 63mm per 100 296.00 246.67
  per 50 154.00 128.33
  per 25 80.00 66.67
           
 C7X Victorian Label (1 hole) 102mm x 63mm per 100 331.00 275.83
      per 50 175.00 145.83
      per 25 92.50 77.08
           
 C8 8" Label 200mm x 18.7mm per 100 303.00 252.50
per 50 156.00 130.00
per 25 81.00 67.50
 
 COS* Ogee Stem 82mm x 42mm per 50 186.00 155.00
  see note at bottom right 150mm tall per 25 98.50 82.08
           
 CES Edwardian Stem 102mm x 47mm per 50 245.00 204.17
196mm tall per 25 127.50 106.25
 
 CRS Rectangular Stem 102mm x 63mm per 50 360.00 300.00
280mm tall per 25 185.00 154.17
 
 CVS Victorian Stem 102mm x 63mm per 50 408.00 340.00
330mm tall per 25 208.00 173.33
 
 P13 3mm Punches set of A - Z, &, 0 - 9 1 set 90.00 75.00
 P15 5mm Punches set of A - Z, &, 0 - 9 1 set 100.00 83.33
 P16 6mm Punches set of A - Z, &, 0 - 9 1 set 121.00 100.83
 PJ Jig (brass & steel) 185mm x 77mm each 151.00 125.83
 PJX Jig (brass & stainless steel) 185mm x 77mm each 254.00 211.67
 PB Wooden holding Box for punches each 39.00 32.50
 
Copper Labels

Metal Plant Labels

Copper Markers

 

Our products and their details are our original designs and are subject to Design Rights and Copyrights worldwide.
Andrew Crace, Alitags, Bourne Lane, Much Hadham, Hertfordshire SG10 6ER, UK.   Tel 01279 842685
  
Copyright 2009 : Andrew Crace       
โรม อ่อนบรรจง